32step Sequencer
Most commercially available analog sequencers are rather expensive and take up a lot of space. Since I am only interested in having a small rack for testing modules that I develop, I
Most commercially available analog sequencers are rather expensive and take up a lot of space. Since I am only interested in having a small rack for testing modules that I develop, I
I made a simple Excel-tool to document resources and cable patching on my Eurorack Synth. With a modular synth it can be difficult to recreate a nice cool sound after
My latest module for spring reverb is heavily inspired by the good advice you can find on Rod Elliot, ESP . My own contribution is that I have made it a double
Can you guess the purpose of the component shown above? Four wires goes into the glass bulb. From the tip of each wire, very thin wires connect to a tiny
This module is a very simple mixer: 7 inputs 7 potentiometers Linear potentiometers also mix CV-signals Two summing ‘op-amps’ With two outputs used Four upper inputs go to the right-hand
This new module generates two selectable odd harmonics with reference to the sine input, and in addition “slices” the sine according to the ramp input and the slice-adjustment.
My “Cute Little Eurorack” is shown elsewhere here on my blog. It was OK, but needed a few simple features just for testing modules during development: Signal mixer, VCA and
A good ring-modulator is a “must have” in any well equipped synth. I made this little design using four carefully selected germanium diodes as the exponential element. Germanium seems like
My new “Super VCO” for Eurorack is now finished as a prototype, and it has become “a little more” complicated than planned 🙂 (48 op-amps, 9 other IC’s, ProMini w.